Yes, it does. Bluetooth devices are designed to comply with international safety standards that limit the amount of radiofrequency energy they can emit. The levels of radiation are typically very low. HOWEVER, it's important to note that prolonged exposure to any type of radiation, even non-ionizing radiation, can potentially have health effects.

Cell phones emit a type of radio frequency (RF) radiation, which is a form of non-ionizing electromagnetic radiation. This radiation is emitted from the antenna of the phone and is used to transmit and receive signals to and from cell phone towers. The antenna is usually located at the back of the phone, and the radiation is emitted from the front of the phone when the device is held close to the user's head during a call.

It's generally recommended to keep your phone away from your body when you sleep, including keeping it at a distance from your head. The exact distance can vary based on factors such as the model of your phone and the strength of its signal, but a distance of at least 3 feet (about 1 meter) is recommended.

Here are some of the potential health risks associated with using a cell phone:

1. Brain cancer: Some studies have suggested a possible link between cell phone use and brain tumors, particularly gliomas and acoustic neuromas.

2. Other types of cancer: Some studies have suggested a possible link between cell phone use and other types of cancer, such as salivary gland tumors and leukemia.

3. Electromagnetic hypersensitivity: Some people report symptoms such as headaches, fatigue, and difficulty concentrating when they use cell phones or other electronic devices. Click here to learn more about EMF-hypersensitivity.

4. Distraction and accidents: Using a cell phone while driving or walking can be dangerous, as it can distract you from your surroundings and increase the risk of accidents.

To reduce your potential exposure to cell phone radiation and any associated health risks, you can take steps such as using a wired headset or speakerphone, keeping your phone away from your body, wearing EMF Shielding Gear that contains 100% Pure Silver Metal to help decrease the level of exposure and limiting your overall use of cell phones and other electronic devices.

Cell phone radiation has become a bigger concern in recent years due to several factors, including the increased use of cell phones and the development of new wireless technologies. Here are some of the reasons why cell phone radiation is now considered a bigger deal than in the past:

1. Increased use of cell phones: With more people using cell phones for longer periods of time, the potential health effects of cell phone radiation have become a greater concern.

2. New wireless technologies: The development of new wireless technologies, such as 5G, has raised concerns about the potential health effects of exposure to high-frequency electromagnetic radiation. While 5G technology is still relatively new, some studies have suggested that high levels of exposure to this type of radiation may be linked to certain health problems.

3. Conflicting research: The scientific community has not yet reached a consensus on the potential health effects of cell phone radiation. However, there are many studies that point to technology causes potential health threats.

4. Increased public awareness: As concerns about the potential health effects of cell phone radiation have grown, many people have become more aware of the issue and are seeking information about how to reduce their exposure.

*In 2021, the FCC was required to revise the EMF emission regulations due to evidence of widespread sickness in areas with 5G connectivity. Click HERE to learn more.

Cell phones produce a type of electromagnetic field (EMF) radiation known as radiofrequency (RF) radiation. RF radiation is a form of non-ionizing electromagnetic radiation that has a lower frequency and energy than ionizing radiation such as X-rays and gamma rays.

The level of emission from a phone varies based on the number of commands the user is initiating on the device. The more commands stream, the higher levels of EMF will be emitted. Use an EMF meter to determine the exact level of EMF emissions at any given time. Click HERE to learn how to measure EMF.

Open the 'Settings' app on your phone and further tap the option 'Wi-Fi & Network'. Now, tap on the option 'SIM & Network' and there you will be able to see a list of all technologies under the 'Preferred network type' option.

Here are some factors that may influence the level of EMF radiation emitted by a laptop and its potential health effects:

1. Proximity to the body: When you use a laptop on your lap, the device is in close proximity to your body, which means you may be exposed to more EMF radiation than if you were using the laptop on a desk or table. To reduce your exposure to laptop EMF radiation, you can use a lap desk or other shielding devices such as our EMF Shielding Laptop case which includes it's own Lap Cover to act as a barrier between your body and the laptop.

2. Length of use: The longer you use a laptop, the more EMF radiation you may be exposed to. If you use a laptop for several hours at a time, you may be at a greater risk of potential health effects than if you only use the device for short periods.

3. Wireless connectivity: When a laptop is connected to Wi-Fi or Bluetooth, it may emit more EMF radiation than if it is in airplane mode or disconnected from wireless networks. To reduce your exposure to laptop EMF radiation, you can turn off Wi-Fi and Bluetooth when you're not using them or use a wired Ethernet connection instead.

4. Power level: The power level of a laptop can also affect the level of EMF radiation it emits. Laptops that are plugged in and charging may emit more radiation than those that are running on battery power.

Overall, while the potential health effects of laptop EMF radiation are still being studied, it's a good idea to take steps to reduce your exposure to EMF radiation from laptops and other electronic devices. This can include using devices that create a barrier between your body and the laptop, limiting your use of laptops and other electronic devices, and turning off wireless connectivity when you're not using it.

Laptops are one of the most significant sources of Electromagnetic Fields (EMF) radiation, which is declared toxic by the World Health Organization. Using a laptop while on the body concentrates EMF radiation on the lower abdominal area, which can be especially harmful for the reproductive organs in both males and females.

Yes, all products are eco-friendly. In fact, all products are made with natural organic material that's both biodegradable AND recyclable. Also, all packaging material is recyclable as well, and the stickers naturally disintegrate after a short period of time.

Yes, Silver Affect's apparel really does work.

Our stylish garments are carefully designed with a special blend of 99% Pure Silver Metal, Copper, Nickel, and other natural organic fibers, which are scientifically proven to help shield the body against EMF radiation. Its naturally conductive material is not only EMF Shielding, but it also contains antimicrobial and antibacterial properties, which help to inhibit the growth of microorganisms, by reducing odor caused by bacteria, helping to prevent the spread of infectious diseases, and improving hygiene in healthcare settings.

However, it's important to understand that after a certain period of time, the conductive properties will decrease due to its natural material. Click HERE for further details...

No, they're not heavy at all. It is the same weight as traditional streetwear. Since the silver metal is woven into modal fibers, it takes on the jersey modal fabric's soft, comfortable and lightweight feel.

At Silver Affect, we're more than just a company - we're a family of technology enthusiasts who share a passion for health, wellness, and cutting-edge advancements in the world of tech. We understand that as technology continues to evolve, so does our exposure to high levels of EMF radiation, and we're on a mission to make sure our fellow techies are well-informed and protected without sacrificing style. That's why we've created a brand-new segment of techwear called Silver Affect 'Conductive Gear' - a fusion of high fashion and functionality with a pure silver metal conductive barrier to shield the body from the harmful effects of EMF radiation. Our clothing is more than just a functional wardrobe - it's a statement about our commitment to living a healthy, connected, and stylish life in the digital age. Join us in our mission to revolutionize the way we wear technology and protect ourselves from harmful EMF radiation exposure. Click HERE for more info...

Silver Affect Wardrobe shields up to 5GHz with 99% effectiveness. The percentage of shielding slightly decreases with strengths over 5GHz.

Each product will lose conductivity over time, especially after washing the garments more than 150 times. This is the same truth for ALL brands that produce EMF Shielding products. The reason being, EMF shielding garments contain natural materials such as copper and silver, which oxidizes in time and can reduce conductivity. Additionally, repeated washing and drying of the garments can cause wear and tear on the fabric, which can also impact conductivity.

This is why it is essential to hand wash garments with all-natural detergent, which will help to minimize wear and tear on the fabric and prevent further oxidation of the natural materials, thus prolonging the effectiveness of the EMF shielding properties. Click HERE for comprehensive care instructions

Yes.

There are two types of radiation that can be of concern during air travel: cosmic radiation and electromagnetic radiation from electronic devices.

The first is Cosmic radiation and it is a type of ionizing radiation that comes from outer space and can penetrate the Earth's atmosphere. It is generally considered to be a low-level risk for most people, including air travelers, but some people who fly frequently may be exposed to higher levels.

The second is Electromagnetic radiation from electronic devices, such as cell phones and laptops during air travel. It is important to note that the primary source of this radiation is not the air travel environment itself, but rather the electronic devices that passengers bring on board.

Silver Affect gear is able to shield against both types of radiation during air travel.

Choosing the right size for EMF shielding wear is important for ensuring that you get the maximum protection and comfort from the garment. Here are some tips to help you select the best size:

Measure yourself: Use a tape measure to measure your chest, waist, and hips. Record these measurements in inches or centimeters.

1. 2. Check the size chart: The measurements are in inches and true to size and the lining is a 2 way stretch.

2.  

3. 3. Consider your body type: Think about your body type and choose a size that will fit comfortably around your chest, waist, and hips. If you are in between sizes, it is usually better to choose the larger size for a more comfortable fit.

4.  

5. 4. Read reviews: Look for customer reviews of the product to get an idea of how the sizing runs. If there are no reviews present and you still need help, then please feel free to reach out to our customer care department at CustomerService@silveraffect.com and we'll do our best to help you choose the size that fits best for you.  

6.  

By following these tips, you can choose the best size for your EMF shielding wear and enjoy the maximum protection and comfort from the garment.

The frequency of use for EMF shielding wear can depend on several factors, including the specific product, the level of exposure to electromagnetic radiation, and the individual's sensitivity to EMF.

In general, if you are someone who is frequently exposed to EMF from electronic devices or other sources, you may choose to wear EMF shielding clothing or accessories on a daily basis. However, if your exposure to EMF is more occasional, you may only need to wear the product when you are in situations where you are likely to be exposed to higher levels of electromagnetic radiation, such as when using a computer or cell phone for an extended period.

It is also important to note that EMF shielding wear should not be worn continuously, as this can lead to skin irritation or discomfort. It is recommended that you take breaks from wearing the garment every few hours or as needed to allow your skin to breathe and reduce any potential irritation.

Ultimately, it is safe and comfortable enough to wear during the day/night!

Click HERE to see care instructions.

If the garment is properly washed, it will retain its shielding ability. Absolutely DO NOT wash in hot water. DO NOT wring the garment out. DO NOT put in dryer. These activities reduce the conductivity (ability to shield). Please click HERE for cleaning instructions...

• - Sleep with the wifi router off
• - Sleep with a cell phone on airplane mode
• - Minimize Bluetooth devices unless in use
• - Eat a healthy and well-balanced diet
• - Exercise and maintain a good immunity-boosting regimen

Pure silver metal, by itself, does not block EMF (electromagnetic fields). In fact, silver is actually a good conductor of electricity, which means it can conduct electromagnetic radiation rather than block it.

When an electric current flows, it carries electrons through a conductor, then generates EMF radiation. When silver is present, the metal begins to conduct resistance against the current, causing it to deflect the radiation in the opposite direction.

Silver Affect uses Pure Silver Metal as a conductive layer to dissipate electromagnetic radiation and reduce its impact, along with a combination of other natural material which has been proven to provide the highest level of protection against EMF radiation. Click HERE to learn more...

To measure the radiation from your cell phone, you can use a specialized device called an RF (radio frequency) meter or EMF (electromagnetic field) meter. These devices measure the level of electromagnetic radiation emitted by your cell phone.

1. To learn how to use an EMF Meter, click HERE for further instructions...

The safe distance to stand in proximity to a power line depends on the voltage of the power line and the conditions of the surrounding environment. Here are some general guidelines:

1. 1. For power lines with voltages up to 50 kV, the safe distance is generally at least 10 feet (3 meters) away.

2. 2. For power lines with voltages between 50 kV and 200 kV, the safe distance is generally at least 15 feet (4.6 meters) away.

3. 3. For power lines with voltages between 200 kV and 500 kV, the safe distance is generally at least 20 feet (6 meters) away.

4. 4.For power lines with voltages above 500 kV, the safe distance can range from 50 feet (15 meters) to several hundred feet (hundreds of meters) away, depending on the conditions.

5.  

It's important to note that these guidelines are general recommendations and may not apply in all situations. Factors such as weather conditions, the type of power line (e.g. overhead vs. underground), and the location of the power line (e.g. near a road or building) can all affect the safe distance.

Click HERE for further data on this concern.

No, 5 GHz WiFi and 5G cellular are not the same.

5 GHz WiFi is a frequency band used for wireless communication that operates on the 5 GHz radio frequency. It is used for local wireless networking and is commonly found in homes, offices, and public spaces. It is often used for high-bandwidth activities like video streaming and online gaming because it provides faster data transfer speeds than the older 2.4 GHz WiFi.

On the other hand, 5G cellular is the fifth generation of cellular network technology. It is designed to provide faster data transfer speeds, lower latency, and increased network capacity compared to previous generations of cellular networks like 4G or 3G. 5G operates on different frequency bands, including millimeter-wave (mmWave) and sub-6 GHz bands, depending on the network operator and location.

So, while they may share the same number in their names, 5 GHz WiFi and 5G cellular are different technologies used for different purposes.

EMF stands for Electromagnetic Fields, which are a type of energy that travels through space and carries electromagnetic radiation. EMF is produced by many sources, including the sun, electrical appliances, power lines, and wireless communication devices.

EMF is classified into two categories: ionizing and non-ionizing. Click HERE to learn more...

EMF safety regulations are put in place by government agencies and international organizations to set limits on the levels of exposure to EMF that are considered safe for humans.

However, the Federal Communications Commission (FCC) regulates the National Exposure Limit in the US, which was set about 27 years ago in 1996 to cover 300KHz - 100GHz. In 2021 the FCC lost a groundbreaking lawsuit initiated by the Children’s Health Defense requiring the FCC to acknowledge the widespread EMF-hypersensitivity sickness and the dire need to revise the current regulations. Click HERE to learn more...

EMF radiation is produced by many sources, including natural and man-made sources. Here are some common sources of EMF radiation:

1. Natural sources: The sun is a natural source of EMF radiation, including ultraviolet (UV) radiation and visible light. Other natural sources of EMF radiation include lightning, cosmic radiation, and the earth's magnetic field.

1. 2. Electrical devices: Most electrical devices and appliances produce some level of EMF radiation. Examples include power lines, electrical wiring, electric motors, and home appliances such as TVs, radios, and computers.

2.  

3. 3. Wireless communication devices: Wireless devices such as cell phones, Wi-Fi routers, Bluetooth devices, and smart home devices also produce EMF radiation.

4.  

5. 4. Medical equipment: Medical equipment such as X-ray machines, CT scanners, and MRI machines produce ionizing radiation, which is a type of EMF radiation.

6.  

7. 5. Industrial sources: Certain industries such as welding, mining, and metalworking can produce high levels of EMF radiation.

It is important to note that the amount of EMF radiation emitted by these sources can vary widely, and the potential health effects of exposure to EMF radiation can depend on a number of factors, including the frequency and intensity of the radiation, the duration of exposure, and the distance between the source of the radiation and the person being exposed. Click HERE to learn some "Natural Ways to Reduce EMF Exposure"...

EMF Meters are a great way to measure EMF in many different environments because they can help you to understand the levels of EMF radiation that you are surrounded by and whether they're within the recommended safety limits. Click HERE to learn how to use an EMF Meter

1. Distance: The strength of the Wi-Fi signal decreases rapidly as you move away from the router.

1. 2. Shielding: You can also use EMF shielding materials to block or reduce the amount of radiation that reaches you. Check out our EMF Shielding Gear as it is scientifically proven to be designed with the most effective shielding material.

2.  

3. 3. Turn off Wi-Fi: Turn off your Wi-Fi router when you are not using it.

4.  

5. 4. Use a wired connection: If possible, consider using a wired connection, such as an Ethernet cable, to connect to the internet instead of relying on Wi-Fi.

6.  

To learn more ways to reduce emission in your environment, then click HERE.

Yes, humans do have electromagnetic fields (EMF), which are also known as bioelectromagnetic fields. These fields are generated by the electrical activity in the human body, particularly in the nervous system and the heart.

The nervous system uses electrical impulses to transmit information between neurons and to control muscle movement. The heart also generates electrical activity, which can be measured using an electrocardiogram (ECG).

These electrical signals create tiny currents in the body that produce a weak electromagnetic field. This field can be detected using specialized equipment, such as a magnetometer, and is strongest near the surface of the body.

There are many sources of electromagnetic fields (EMFs) in our daily lives, including both natural and man-made sources. Some common sources of EMFs include:

1. 1. Power lines: High voltage power lines and transformers are sources of EMFs.

2.  

3. 2.Electronic devices: All electronic devices that use electricity, such as cell phones, Wi-Fi routers, computers, and televisions, produce EMFs.

4.  

5. 3. Microwave ovens: Microwaves produce EMFs while they are in operation.

6.  

7. 4.Lighting: Fluorescent lighting, compact fluorescent bulbs, and LED bulbs can all produce EMFs.

8.  

9. 5. Medical equipment: X-rays, MRI machines, and other medical equipment can produce EMFs.

10.  

11. 6. Natural sources: The earth's magnetic field, thunderstorms, and the sun can all produce EMFs.

Turning your Wi-Fi router off at night is one step you can take to reduce your exposure. However, it is important to note that this may not be necessary or practical for everyone.

If you do choose to turn off your Wi-Fi router at night, there are a few things to keep in mind. First, make sure to turn off the router's power supply completely, as simply turning off the Wi-Fi signal may not eliminate all sources of EMF radiation. Second, turning off your Wi-Fi router may also disable any smart home devices or security systems that rely on Wi-Fi connectivity.

Ultimately, the decision to turn off your Wi-Fi router at night is a personal one, and the potential benefits and drawbacks should be carefully considered before making a decision. If you are concerned about your exposure to EMFs, there are other steps you can take to reduce your exposure, such as increasing the distance between yourself and the router, using shielding materials, or using a wired connection instead of Wi-Fi.

If you are unsure if the product has helped you, then here are some recommendations:

1. 1. Please give it time: Depending on the type of product and the issue you are experiencing, it may take some time to see results. Some products may provide immediate relief, while others may take a few days or weeks to produce noticeable effects. It's important to use the product consistently and as directed for the best results.

2.  

3. 2. Consult a healthcare professional: If you are experiencing a health issue or condition, it's always a good idea to consult with a healthcare professional. They may be able to offer additional insights or treatment options that could be beneficial.

4.  

5. 3. Feel free to reach out to us: If you have questions or concerns about the product or its effectiveness, you can reach out to our customer service team for further guidance/suggestions.

6.  

Please keep in mind that we are not healthcare providers and do not make any claims to be. Our goal is to provide a resource for those who experience symptoms of hypersensitivity and would like an extra layer of protection. It's important to follow the usage instructions provided with the product and consult a healthcare professional if you have any concerns about your health.

New unworn/unused Gear is eligible for return 7 days after the delivery date. USED garments are eligible for return after 1-year to ensure it is properly recycled, the customer will then receive a 25% discount off a new garment. Contact us at customerservice@silveraffect.com to receive a complimentary shipping label. Click HERE for further details...

Money-back guarantee on new unworn/unused Gear within 7 days after the delivery date. After 7 days, the order is only eligible for exchange. Contact Customer Service for additional questions. Click HERE to learn more...

Our Silver Affect Recycling Program is designed to help offset the carbon emissions associated with shipping and packaging material, along with recycling unwanted natural material to help reduce greenhouse gas emissions and landfill waste. Click HERE to learn more...

What are the incentives to this? Our Customers will receive all orders shipped to them in premium packaging that's biodegradable and contains compostable bio-plastic bags in order to reduce carbon footprint. They will be able to feel good about their contribution to our environment becaue they're helping to conserve natural resources, reduce waste, and create a more sustainable future for ourselves and future generations to come. Also, our customers will benefit by receiving HUGE DISCOUNTS if they choose to participate in our "USED - RETURN after 1 year program." This means, if our customers properly return their used and unwanted Silver Affect Gear in exchange for a new product, they will receive a HUGE percentage off on their next order.

Overall, our Silver Affect Recycling Program is a big step in the right direction towards reducing the environmental impact of material goods and by promoting health and sustainability all together.